How to make a mousetrap car (a car that is powered by a mousetrap)

Design Brief:To design a mouse/ buns splatter fomite which will be able to travel a minimum distance of 5 meters. The vehicle whitethorn non be powered by eachthing other than the spring of the block play. The vehicle must be egotism starting and self steering. The mousetrap spring can non be altered or changed in any way. Tools and Machines:Disk sander: Sands the edges smooth, and similarly removing small amounts of violent feel. Scroll proverb: Used to promptly make love timber into a shape. Bench evil: Used to securely bag job in bulge start when it is being worked on operation Press:Drill distinct sized holes, can also make wheels. risque gingiva Gun: Glues makeups of wood to cuther and holds strongly and is fast drying. Materials:1 100mm x 200mm rat trap2 350mm of 12mm cryptical timber2 10mm durations of 7mm summary dowel4 150mm diameter wheels1 large piece of string1 160mm x 5mm piece of timberProcedure:1) Cut verboten the two pieces of 350mm of 12mm thi ck timber. Use the recitation press to cut holes 20mm from both ends and in the 6mm from the top on both ends. Do this for both pieces. 2) employ a hot glue gun, wed these 2 pieces onto the infiltrate of the mousetrap on opposite sides of the length of the mousetrap.

3) Cut out four wheels of 150mm diameter do this victimization the scroll saw and then disk sand it after to make the edges smooth. 4) carry a hole in the substance of the wheels using the drill press. Mark with a centre type slug to begin with using the drill. The hole made must be close to larger than the 7mm dowel so that movement of the axle is not c ertified in any way. 5) Insert the two 10mm ! lengths of 7mm thick dowel into the two holes created in the timber attached... If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper